How to connect eChat Viber telephony to X10CRM
Call customers on Viber from X10CRM, route incoming calls to a rep or a group, and keep call history alongside the deal.
Prepare active eChat Viber telephony, its API key and SIP details, telephony administrator access and an employee with a configured calling workplace.
#1. Add the connection
Open Viber telephony in eChat channel settings (/settings/social/viber-telephony/). Add the number, Viber telephony API key, SIP server and port from eChat. Save and verify the connection.
#2. Assign an extension
Create an extension or select an existing eChat handset. Assign an active employee with telephony permission. Connect the line to the PBX and check registration status.
#3. Set incoming call routing
Choose the handset employee, an operator group, a specific employee or disabled incoming calls. Check group membership when routing to a group.
#4. Check an outbound call
Sign in as the assigned employee. Select the Viber line, open a test deal and call an agreed test number. Verify two-way audio and hang-up behaviour.
#5. Check incoming calls and history
Call the connected Viber number from a test account. Confirm the intended employee receives it, the outcome appears in the log and, when recording is enabled, the audio is available to an authorised user.
#Troubleshooting
| Symptom | What to check |
|---|---|
| No line in the phone panel | Check the assignment to this employee, permissions, active status and registration. |
| API works but calls fail | API access and SIP registration are separate stages. Check SIP details and routing with the administrator. |
| Incoming calls reach the wrong person | Check incoming mode and operator group membership. |
| No audio or recording | Check microphone permission, the device, media routing and recording settings. |
eChat pricing, concurrent call limits and number conditions are agreed separately. Several extensions do not imply unlimited simultaneous calls.
